diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index ca82739..84bca32 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -56,6 +56,9 @@
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -71,6 +74,9 @@
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -86,6 +92,9 @@
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -101,6 +110,9 @@
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/board/ti/j721e/j721e.env b/board/ti/j721e/j721e.env
new file mode 100644
index 0000000..446395a
--- /dev/null
+++ b/board/ti/j721e/j721e.env
@@ -0,0 +1,82 @@
+#include <environment/ti/ti_armv7_common.env>
+#include <environment/ti/mmc.env>
+#include <environment/ti/ufs.env>
+#include <environment/ti/k3_dfu.env>
+
+#if CONFIG_CMD_REMOTEPROC
+#include <environment/ti/k3_rproc.env>
+#endif
+
+default_device_tree=k3-j721e-common-proc-board.dtb
+findfdt=
+	setenv name_fdt ${default_device_tree};
+	if test $board_name = j721e; then
+		setenv name_fdt k3-j721e-common-proc-board.dtb; fi;
+	if test $board_name = j721e-eaik || test $board_name = j721e-sk; then
+		setenv name_fdt k3-j721e-sk.dtb; fi;
+	setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000
+	${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+#if CONFIG_SYS_K3_SPL_ATF
+#if CONFIG_TARGET_J721E_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw
+#elif CONFIG_TARGET_J7200_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw
+#endif
+#endif
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+	fdt address ${fdtaddr};
+	fdt resize 0x100000;
+	for overlay in $name_overlays;
+	do;
+	load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+	fdt apply ${dtboaddr};
+	done;
+partitions=uuid_disk=${uuid_gpt_disk};
+	name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+	${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+	${bootdir}/${name_fit}
+
+#if CONFIG_TARGET_J7200_A72_EVM
+do_main_cpsw0_qsgmii_phyinit=1
+init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;
+	gpio clear gpio@22_16
+main_cpsw0_qsgmii_phyinit=
+	if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then
+		run init_main_cpsw0_qsgmii_phy;
+	fi;
+#elif CONFIG_TARGET_J721E_A72_EVM
+init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;
+	gpio clear gpio@22_16
+main_cpsw0_qsgmii_phyinit=
+	if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then
+		do_main_cpsw0_qsgmii_phyinit=1; else
+		do_main_cpsw0_qsgmii_phyinit=0; fi;
+	if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then
+		run init_main_cpsw0_qsgmii_phy;			\
+	fi;
+#endif
+
+#if CONFIG_TARGET_J721E_A72_EVM
+rproc_fw_binaries=2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
+#endif
+
+#if CONFIG_TARGET_J7200_A72_EVM
+rproc_fw_binaries=2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw
+#endif
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index 48b1cea..de92cd4 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -10,10 +10,6 @@
 #define __CONFIG_J721E_EVM_H
 
 #include <linux/sizes.h>
-#include <environment/ti/mmc.h>
-#include <environment/ti/k3_rproc.h>
-#include <environment/ti/ufs.h>
-#include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
 #define CFG_SYS_SDRAM_BASE1		0x880000000
@@ -28,127 +24,6 @@
 #define CFG_SYS_UBOOT_BASE		0x50080000
 #endif
 
-/* HyperFlash related configuration */
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS					\
-	"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"	\
-	"findfdt="							\
-		"setenv name_fdt ${default_device_tree};"		\
-		"if test $board_name = j721e; then "			\
-			"setenv name_fdt k3-j721e-common-proc-board.dtb; fi;" \
-		"if test $board_name = j721e-eaik || test $board_name = j721e-sk; then "		\
-			"setenv name_fdt k3-j721e-sk.dtb; fi;"	\
-		"setenv fdtfile ${name_fdt}\0"				\
-	"name_kern=Image\0"						\
-	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "	\
-		"${mtdparts}\0"						\
-	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-#define PARTS_DEFAULT \
-	/* Linux partitions */ \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#if defined(CONFIG_TARGET_J721E_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"addr_mcur5f0_0load=0x89000000\0"				\
-	"name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
-#elif defined(CONFIG_TARGET_J7200_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"addr_mcur5f0_0load=0x89000000\0"				\
-	"name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
-#endif /* CONFIG_TARGET_J721E_R5_EVM */
-#else
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
-#endif /* CONFIG_SYS_K3_SPL_ATF */
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
-	"boot=mmc\0"							\
-	"mmcdev=1\0"							\
-	"bootpart=1:2\0"						\
-	"bootdir=/boot\0"						\
-	EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"rd_spec=-\0"							\
-	"init_mmc=run args_all args_mmc\0"				\
-	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
-	"get_overlay_mmc="						\
-		"fdt address ${fdtaddr};"				\
-		"fdt resize 0x100000;"					\
-		"for overlay in $name_overlays;"			\
-		"do;"							\
-		"load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
-		"fdt apply ${dtboaddr};"				\
-		"done;\0"						\
-	"partitions=" PARTS_DEFAULT					\
-	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
-		"${bootdir}/${name_kern}\0"				\
-	"get_fit_mmc=load mmc ${bootpart} ${addr_fit} "			\
-		"${bootdir}/${name_fit}\0"				\
-	"partitions=" PARTS_DEFAULT
-
-/* Set the default list of remote processors to boot */
-#if defined(CONFIG_TARGET_J7200_A72_EVM)
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY				\
-	"do_main_cpsw0_qsgmii_phyinit=1\0"				\
-	"init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"		\
-		 "gpio clear gpio@22_16\0"				\
-	"main_cpsw0_qsgmii_phyinit="					\
-	"if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
-			"test ${boot} = mmc; then "			\
-		"run init_main_cpsw0_qsgmii_phy;"			\
-	"fi;\0"
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#elif defined(CONFIG_TARGET_J721E_A72_EVM)
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY				\
-	"init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"		\
-		 "gpio clear gpio@22_16\0"				\
-	"main_cpsw0_qsgmii_phyinit="					\
-	"if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM " \
-	"|| test $board_name = j721e; then " \
-	"do_main_cpsw0_qsgmii_phyinit=1; else "			\
-	"do_main_cpsw0_qsgmii_phyinit=0; fi;"			\
-	"if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
-			"test ${boot} = mmc; then "			\
-		"run init_main_cpsw0_qsgmii_phy;"			\
-	"fi;\0"
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#endif
-
-#ifdef CONFIG_TARGET_J721E_A72_EVM
-#define DEFAULT_RPROCS	""						\
-		"2 /lib/firmware/j7-main-r5f0_0-fw "			\
-		"3 /lib/firmware/j7-main-r5f0_1-fw "			\
-		"4 /lib/firmware/j7-main-r5f1_0-fw "			\
-		"5 /lib/firmware/j7-main-r5f1_1-fw "			\
-		"6 /lib/firmware/j7-c66_0-fw "				\
-		"7 /lib/firmware/j7-c66_1-fw "				\
-		"8 /lib/firmware/j7-c71_0-fw "
-#endif /* CONFIG_TARGET_J721E_A72_EVM */
-
-#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define DEFAULT_RPROCS ""						\
-		"2 /lib/firmware/j7200-main-r5f0_0-fw "			\
-		"3 /lib/firmware/j7200-main-r5f0_1-fw "
-#endif /* CONFIG_TARGET_J7200_A72_EVM */
-
-#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#endif
-
-#define EXTRA_ENV_DFUARGS \
-	DFU_ALT_INFO_MMC \
-	DFU_ALT_INFO_EMMC \
-	DFU_ALT_INFO_RAM \
-	DFU_ALT_INFO_OSPI
-
 #if CONFIG_IS_ENABLED(CMD_PXE)
 # define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
 #else
@@ -178,15 +53,6 @@
 
 /* Incorporate settings into the U-Boot environment */
 #define CFG_EXTRA_ENV_SETTINGS					\
-	DEFAULT_LINUX_BOOT_ENV						\
-	DEFAULT_MMC_TI_ARGS						\
-	DEFAULT_FIT_TI_ARGS						\
-	EXTRA_ENV_J721E_BOARD_SETTINGS					\
-	EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_RPROC_SETTINGS					\
-	EXTRA_ENV_DFUARGS						\
-	DEFAULT_UFS_TI_ARGS						\
-	EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY				\
 	BOOTENV
 
 /* Now for the remaining common defines */